Checking Connections Of The Emulator System - Renesas Emulation Pod M306H7T3-RPD-E User Manual

M306H7T3-RPD-E User's Manual

3.3.2 Checking Connections of the Emulator System

Check to see that the emulator debugger has been connected correctly to the emulator.
REJ10J0964-0100 Rev.1.00 August 01, 2005
3. Usage (How to Use the Emulator Debugger)
Checking connections of the emulator system
When the emulator debugger is connected correctly to the emulator after you
have finished setting up the Init dialog box and the MCU Setting dialog box,
you will see a message "Connected" displayed on the "Debug" tab of the
Output window.
Page 55 of 88