Specifications - Renesas Emulation Pod M306H7T3-RPD-E User Manual

M306H7T3-RPD-E User's Manual

1.4 Specifications

Tables 1.5 and 1.6 list the specifications of the M306H7T3-RPD-E.
Table 1.5 M306H7T3-RPD-E specifications (1/2)
Item
Applicable MCU
Usable MCU mode
Emulation Memory
Applicable power supply
Maximum operating frequency
Clock supply
Basic debugging functions
Real-time trace function
Real-time RAM monitor function
Hardware break function
Execution time measurement function
C0 coverage
Event output
External trigger input
Host machine interface
(see "2.3 Connecting the Host Machine" on
page 22)
Power supply to emulator
Overseas standards
*1 Available to connect the host machine that supports USB 2.0. With the USB interface, not all hardware (such as host
machine, USB devices, USB hub) combination will work and guaranteed.
REJ10J0964-0100 Rev.1.00 August 01, 2005
M16C/6H Group M306H7
Single-chip mode
1MB
VCC2=4.0V--5.5V, VCC1=3.0V--VCC2 (Xin: when operating without
division)
VCC2=2.9V--5.5V, VCC1=2.9V--VCC2 (Xin: when operating in a
divide-by-16 or 8-mode)
VCC2=2.0V--5.5V, VCC1=2.0V--VCC2 (Xcin when operating)
*
VCC2=2.0V--2.6V operates only in low power dissipation mode.
16MHz
Internal oscillator circuit board (OSC-3)
X -X
IN OUT
Switchable to external oscillator input
Internal oscillator circuit (fixed 32.768kHz)
X -X
CIN COUT Switchable to external oscillator input
- Download
- Software break (max. 64 points)
- Program execution/stop (allows free-run execution supporting software
breaks)
- Memory reference/setting (reference/setting C-variables, run-time
execution)
- Register reference/setting
- Disassemble display
- C-level debugging, etc.
- 32K-cycle bus information recordable
(Bus, external trigger, time stamp)
- 5 trace modes supported (Break/Before/About/After/Full)
- Can be recorded ON/OFF by events
- 1,024 bytes
- Data/last access result
6 points (Bus detection, interrupt, external trace signal)
Time between program start and stop
Maximum/minimum/average execution time and pass count of specified
four zones.
Count clock: Equal to MCU Clock or 16 MHz
256KB
Break x1, Event x6
TTL level x8
Dedicated parallel (PC4701HS)
LPT parallel (PC4701M/PC4701U)
Serial (PC4701HS/PC4701M)
USB (USB 1.1, full-speed)*1
LAN (PC4701HS/PC4701U)
AC100--120V, AC200--240V (50/60Hz)
US EMI standard [FCC part15 Class A]
CE marking [1998 Class A, EN55024: 1998]
Description
1. Outline
Page 18 of 88