Connecting The User System - Renesas R0E3308B0EPB00 User Manual

R0E3308B0EPB00 User's Manual

2.9 Connecting the User System

There are eight ways available to connect the emulation probe to user systems as shown in Figure 2.7.
M3T-F160-100NSD
100-pin LQFP
(not included)
Figure 2.7 Connection of the R0E3308B0EPB00 and user system
Note on Connecting the User System:
• Take care not to attach the converter board in a wrong direction. It may cause a fatal damage to the emulator
and user system.
R20UT0210EJ0200 Rev.2.00
Sep 16, 2010
100-pin 0.5mm pitch
M30800T-PTC
(not included)
M3T-FLX-100NSD
M3T-100LCC-QSD
100-pin QFP
100-pin LQFP
(not included)
(not included)
CAUTION
Emulation probe
144-pin 0.5mm pitch
M3T-100LCC-DMS
(not included)
M3T-FLX-144NSD
144-pin LQFP
(not included)
2. Setup
Page 30 of 98