Names And Functions Of The Pc4701 Front Panel Leds - Renesas Emulation Pod M306H7T3-RPD-E User Manual

M306H7T3-RPD-E User's Manual

1.3.2 Names and Functions of the PC4701 Front Panel LEDs

Figure 1.2 shows the names of the LEDs on the front panel of the emulator.
System status LEDs
Figure 1.2 Names of the LEDs on the front panel of the PC4701
(1) System Status LEDs
The system status LEDs indicate the emulator PC4701's power supply, firmware operating status, etc. Table 1.3 lists the
definition of each system status LED.
Table 1.3 Definitions of the system status LEDs
Name Status
POWER
SAFE Flashing
ERROR Flashing
REJ10J0964-0100 Rev.1.00 August 01, 2005
POWER
SAFE
ERROR
STATUS OF
SYSTEM
RESET
PERFORMANCE
EMULATOR
ON Emulator system power supply is turned ON.
OFF Emulator system power supply is turned OFF.
ON Emulator system is operating normally.
Special mode (maintenance mode) for downloading firmware. The
emulator system does not operate except for downloading firmware and
the self-check.
OFF Emulator system is not operating normally (system status error).
ON Emulator system is not operating normally.
Downloading firmware.
ON Emulator system is operating normally.
STATUS OF
TARGET
POWER
CLOCK
RESET
RUN
HALT
HIGH
Meaning
Target status LEDs
1. Outline
Page 16 of 88