Table of Contents
Advertisement
M306H7T3-RPD-E User's Manual
5. Troubleshooting
This chapter describes how to troubleshoot when this product does not work properly.
5.1 Flowchart to Remedy the Troubles
Figure 5.1 shows the flowchart to remedy troubles from when power to the emulator is activated until the emulator debugger
starts up. Check this while the user system is not connected. For the latest FAQs visit the Renesas Tools Homepage.
Turning on the power of PC4701
PC4701 Front panel LEDs
Init dialog box of emulator debugger
displayed
Program window of emulator debugger
displayed
Figure 5.1 Flowchart to remedy troubles
REJ10J0964-0100 Rev.1.00 August 01, 2005
http://www.renesas.com/en/tools
Not normal
1. Check emulator system connections.
See "2.4 Connecting the PC4701" (page 23).
2. Redownload the firmware.
See "2.6 Downloading Firmware" (page 28).
3. Restart the PC4701 system.
Not normal or error displayed
1. Check the operating environment etc. of the emulator
debugger.
See the emulator debugger user's manual (online
manual).
2. Reinstall the emulator debugger.
Error displayed
See "5.2 (2) Program Window is Not Displayed at Debugger
Startup (User System Connected)" (page 82).
See "5.2 (3) Program Window is Not Displayed at Debugger
Startup (User System Not Connected)" (page 83).
5. Troubleshooting
Page 80 of 88
Advertisement
Table of Contents
