Renesas Emulation Pod M306H7T3-RPD-E User Manual page 41

M306H7T3-RPD-E User's Manual
(3) Replacing Oscillator Circuit Boards
Figure 2.16 shows how to replace the oscillator circuit boards. For the position of the oscillator circuit board, see Figure 2.15.
Figure 2.16 Replacing oscillator circuit boards
Note on Replacing the Oscillator Circuit Board:
Always shut OFF power when removing the upper cover or replacing oscillator circuit board. Otherwise,
internal circuits may be damaged.
REJ10J0964-0100 Rev.1.00 August 01, 2005
(1) Unscrew the screw securing the oscillator circuit
board.
(2) Lift off the oscillator circuit board.
(3) Insert the connector of a new oscillator circuit board
to the connector of the main board.
(4) Secure the new oscillator circuit board with the
screw.
CAUTION
2. Setup
Page 39 of 88