Part Of Print Is Missing - Thermo Scientific PrintMate A79510100 Operator's Manual

PrintMate A79510100 Issue 2

Part of Print is Missing

Error Message / Symptom
Part of print is missing.
58
Possible Cause
Print Template set up incorrectly.
Tape jammed.
Cassette Clamp error.
Print Head obstructed.
Incompatible Cassette.
Instrument Malfunction.
Remedy

Ask Administrator to check
Print Template setup.

Use Print to Screen
function to check print
layout.

Open Print Door and Waste
Spool Access.

Use Tape Feed function on
Touch Panel to check that
Tape feeds correctly.

If Tape does not feed
remove and refit Tape (see
Chapter 2 - Changing the
Foil Tape).

Open Print Door and print
a Cassette.

Check Cassette is held
securely during printing and
does not move until the
Cassette Clamp releases it.

If movement is seen call the
Thermo Fisher Scientific
Service Department.

Open Print Door and check
under Cassette Clamp for
debris.

Check that Cassette type is
included on Appendix C -
Approved Cassette List.

Call the Thermo Fisher
Scientific Service
Department.