Table of Contents
Advertisement
Loading Cassette Tubes with Hopper In-Situ
To load Cassettes Tubes containing up to 75 Cassettes into a Hopper:
Use the Control Panel to rotate the Carousel so that an empty Hopper is at the front of the instrument.
Unpack a Tube of Cassettes and remove the End-Cap as shown.
Note
Ensure the Cassette Tube is oriented as shown to avoid the Cassettes spilling out of the Tube.
Use a finger to hold the Cassettes in the Cassette Tube and then turn it upside down so that the open end
of the Cassette Tube is at the bottom.
Operator Guide
15
Advertisement
Table of Contents
