Table of Contents
Advertisement
PrintMate A79510100 Issue 2
Lower the Tube into the open top of the Hopper, being sure to keep a finger on the bottom for as long as
possible; there is a Loading Slot provided for this purpose.
Remove finger from the Loading Slot and allow the Cassettes to fall into position as shown.
The Cassette Tube should sit on a step about half-way down the Hopper as shown.
Warning Failure to ensure Cassettes are properly loaded can cause the hopper to jam.
Warning Ensure that the end of the Cassette Tube is not damaged or deformed as this may cause jams.
Note
When loading Cassette Tubes into Hoppers that are not attached to the Carousel, it is possible to fit the Hopper
with the Tube upside down to avoid the risk of spilling the Cassettes out of the Tube.
14
Advertisement
Table of Contents
