Thermo Scientific PrintMate A79510100 Operator's Manual page 29

Fitting the Foil Tape Roll
Unpack a roll of Foil Tape.
The Foil Tape has a Leader to facilitate loading, and a Sticky Tab to connect the Tape to the Leader and the
Waste Spool.
Note
An empty cardboard tube is packed with the new roll of Foil Tape for use as a new Waste Spool.
To load the Foil Tape:

Remove the Load Spool by lifting it upwards.

Compress the retaining legs, as shown, to allow the cardboard tube to slide off the Load Spool.
Operator Guide
21