System Warnings - Syscom Video MR3000C User Manual

You may select several files and then click on the Download button. The files are packed in a
single Zip-File and transferred to the PC. The Zip-File is stored in the DOWNLOAD directory of the
PC.
A more sophisticated method is to enable the Filters section and to click on the Add button (see
Figure 4.7.2). You may then select all the files matching certain criteria (e.g. all the files that have
been recorded since a specific date). You may use more than one line to narrow down your
selection.
NOTE: We recommend to erase the SD card at the beginning of the measurements at a specific
location and to keep all the files on the SD card throughout the whole monitoring period. In order to
have seamless (without any interruption) recordings (peak files if the vibration level was below the
trigger threshold or additionally event files if the vibration level exceeds the trigger threshold)
throughout the whole monitoring period, it is NOT possible to erase single files. The SD card is
considered as documentary evidence.
4.8

System warnings

In case there are anomalous or incoherent settings about the parameters of the MR3000C/TR,
some warnings will be displayed in order to alert the user.
For example, if the user does not activate the alarms but he wants to receive the mails also with
notification of the alarm, then, immediately after confirmed the operation with the "Apply" button, the
program will show a warning at the top left of the user interface.
MR3000CMR3000C_TR_v2.0_rev1.odt
Figure 4.7.2. Subsection dedicated to the filters for the recording list.
subject to technical change without notice
75