Maintenance - Syscom Video MR3000C User Manual

4.3.13

Maintenance

In the section Diagnostic, you may generate a report of the system to make further investigations
in case of trouble. Please click on download diag report and email it to
syscom.com for further investigations.
NOTE: The log files and other variables used to generate the Diagnostic report are in volatile
memory, do not switch off the MR before the report is generated. Make a report as
soon as a problem has been encountered. If you wait for too long time, the interesting
part of the log file might be overwritten. If the standard interface for communication is
not available, you may use the Wi-Fi access to communicate with the MR.
The Reboot button initiates a warm start of the MR.
Figure 4.3.13. Subsection dedicated to the Maintenance and details on the import section.
The User Parameters section is useful to import user parameters defined in other devices (or even
in the same device), and to export them for future use. During the import phase, you can choose
between a standard import operation, with all the parameters, and a custom importation, where you
select not to modify the current WLAN setting, all the name and comment settings, and the ftp
parameters.
IMPORTANT: If the parameters must be imported from MR1 to MR2, it is necessary that MR2 have
the same firmware version of MR1 or a more recent version.
MR3000CMR3000C_TR_v2.0_rev1.odt subject to technical change without notice
s upport @bartec-
51