Table of Contents
Advertisement
3. The parameters have been changed in the firmware and in the SCS → the firmware has
the priority, therefore the last values registered in the firmware are uploaded on the SCS
during the synchronization.
For any additional information on the SCS cloud software, please refer to the dedicated page on
the
website
or visit http://scs.bartec-syscom.com.
4.3.11
Authentication
Here you can change the password of the MR. The password is used for the WebUI access and for
the SFTP service (see chapter 5.3.1). By default, the password is the serial number of the MR –
shown as UID on the Status screen (see chapter 4.2).
NOTE: please make sure that the new password will be remembered.
4.3.12
Upgrade
In this section, you find:
The Ping button allows you to send a ping request to a Web site. It's useful if you want to
know whether the MR has Internet connectivity. If you can ping a well-known Web site (e.g.
wikipedia.org), if it succeeds, the Internet connection is working.
MR3000CMR3000C_TR_v2.0_rev1.odt
Figure 4.3.11. Subsection dedicated to the authentication.
subject to technical change without notice
49
Advertisement
Table of Contents
Need help?
Do you have a question about the MR3000C and is the answer not in the manual?
Questions and answers