Mail - Syscom Video MR3000C User Manual

4.3.8

Mail

In this section, you can configure the e-mail settings, in order to receive automatically mails from
the MR3000. For this purpose you need an e-mail account and Internet access for the MR3000 -–
check with the PING function as described in Section 4.3.12.
You have to enter the access data of your e-mail account, i.e. User address (e-mail address of
your e-mail account) and the Password in the section User identity. In the section SMTP server
you have to enter the URL (name or IP address of the SMTP server) and the Port.. Moreover, you
can choose the authentication method (automatic is the default option).
A unique e-mail account for all devices can be used, since it is only used to send e-mails.
To illustrate that, let's show an example using GMAIL. If you use a different e-mail service you will
have to check the documentation of your service provider to figure out the URL and the port of the
SMTP server.

Create an address, e.g. mr3k.syscom@gmail.com on the Gmail Web site

Enter this address as User address together with Password in the section User identity

The settings for the SMTP server can be found on the GMAIL site. To quickly explain, enter
smtp.gmail.com for the URL, 25 for the Port and enable TLS encryption.
NOTE: The quality of the mail service varies with the provider.
MR3000CMR3000C_TR_v2.0_rev1.odt
Figure 4.3.8. Subsection dedicated to the mail.
subject to technical change without notice
45