Mobile - Syscom Video MR3000C User Manual

4.3.5

Mobile

Use the Enabled checkbox to enable or disable the mobile communication interface. Be sure to
insert a SIM card in the MR before trying to bring the mobile communication to work (see chapter
2.5.1). After you checked this field, don't forget to click on the "Apply" button. The mobile chipset
takes between 30 seconds and 1 minute to start.
The Status shows if the 3G module is either down (offline), connecting or online.
In the Activation section, you can choose when the 3G module is active. Actually, it could be
switched on only when desired, in order to reduce the consumption. The mode can be either
"Always activated" (the module is always ON) or "Time Scheduling". In the second case, you can
choose at which time it automatically switches on and off.
If some files have been recorded during the rest period of the 3G module, they will be sent when it
is switched on (see also chapter 4.4.4) to (based on what has been configured):
pre-configured e-mail address
•
SCS cloud software
•
FTP
•
In the Network section, appearing only if a SIM card has been recognized, there is information
about:
1. the status of the SIM card, which is normally on "registered";
2. the name of the provider of the SIM card;
MR3000CMR3000C_TR_v2.0_rev1.odt
Figure 4.3.4. Subsection dedicated to the Wi-Fi communication.
subject to technical change without notice
40