Table of Contents
Advertisement
4.3
System
In this part, you find all the settings of the different hardware interfaces and software services of the
MR3000.
4.3.1
SD Card
This subsection shows the capacity of the memory card and the amount of memory available.
Moreover, and indication of the remaining lifetime is displayed. This functionality is available only
with the SWISSBIT SD cards.
You can format the memory SD card with the relative button: this erases ALL the data memorized
on the card. A dialog box pops up and ask for confirmation.
Wait until the formatting is done – takes approx. 10 seconds.
4.3.2
Time
In this tab you configure the timing services of the MR.
In the Status section, the following information are shown:
Local time
•
UTC time
•
MR3000CMR3000C_TR_v2.0_rev1.odt
Figure 4.3.1. Subsection dedicated to SD card.
subject to technical change without notice
35
Advertisement
Table of Contents
Need help?
Do you have a question about the MR3000C and is the answer not in the manual?
Questions and answers