Table of Contents
Advertisement
4.3.15
Monitoring
The section Monitoring has been added in firmware version 2.0.7. It includes the possibility to
choose the warning level of the power supply voltage of the device.
In particular, two threshold levels must be indicated by the user:
warning threshold, meaning that a warning is created when the voltage measured
•
decreases below this level.
release threshold, meaning that the warning condition is released when this level is
•
exceeded.
4.4
User Parameters
In this part you set-up the general parameters of the system.
4.4.1
General
Here you can modify the Name (ID) of the MR (by default mr3000, followed by a dash and the
serial number UID of the MR) and the Comment string.
MR3000CMR3000C_TR_v2.0_rev1.odt
Figure 4.3.15. Subsection dedicated to the system monitoring.
subject to technical change without notice
53
Advertisement
Table of Contents
Need help?
Do you have a question about the MR3000C and is the answer not in the manual?
Questions and answers