Brake Pad Replacement - Suzuki AN650 2002 Service Manual

9-64 CHASSIS

BRAKE PAD REPLACEMENT

• Remove the plug 1.
• Remove the pad mounting pin 2.
• Remove the pads 3.
• Inspect the pad mounting pin for wear. If excessive wear is
found, replace the mounting pin with a new one.
• Assemble the new brake pad 4, insulator 5 and shim 6.
Replace the brake pads as a set, otherwise braking
performance will be adversely affected.
NOTE:
The pad fitted shim and insulator must be installed at piston
side.
• Install the brake pads.