Brake Pad Replacement - Suzuki DL1000 Service Manual

BRAKE PAD REPLACEMENT

• Remove the caliper.
"
Do not operate the brake lever while removing the cal-
iper.
• Remove the pin 1.
• Remove the brake pads by removing the pad mounting pin 2.
• Clean up the caliper especially around the caliper pistons.
• Install the outer pad with the detent A of pad fitted to the
detent B on the caliper holder.
"
Replace the brake pads as a set, otherwise braking
performance will be adversely affected.
• Install the inner pad so that the inner pad will be seated on the
hatched part C.
• Install the pad mounting pin 3.
• Install the pin 4 securely.
CHASSIS 6-57