Brake Pad Replacement - Suzuki EN125-2A Service Manual

BRAKE PAD REPLACEMENT

Lossen the tow pins of caliper
Remove the caliper mounting bolts
off the caliper.
CAUTION:
Do not operate the brake level while dismo-
unting the caliper.
Push the piston and piston holder all the way to
the caliper when removing the brake pads.
Remove the bracket.
Pull out the pins.
Remove the brake pads and replace them.
CAUTION:
Replace the brake pad with a set, otherwise
braking performance will be adversely
affected.
Reassemble the brake pads and the caliper in
the reverse orders.
Tighten the caliper mounting bolts to the
specified torque.
Tightening torque
NOTE:
Push in the piston and piston holder all the
way to the caliper when remounting the
caliper.
.
and take
N m
(2.5 .0 kg m)