ITech IT6000C Series User Manual page 87

Reset-Test
Starting-
Profile
Load-Dump Load dump curve
Copyright © Itech Electronic Co., Ltd.
Select the 12V automotive short-
12V
time voltage drop waveform
Select the 24V automotive short-
24V
time voltage drop waveform
This test is applicable to equipment with re-
set function.
The minimum supply voltage Us-
min (Usmin≤80V)
Usmin
This test verifies the behavior of a DUT dur-
ing and after cranking.
Select the 12V test system.
12V
Select the voltage/duration
of 12V starting profile cor-
1
responding to Level 1.
Select the voltage/duration
of 12V starting profile cor-
2
responding to Level 2.
Select the voltage/duration
of 12V starting profile cor-
3
responding to Level 3.
Select the voltage/duration
of 12V starting profile cor-
4
responding to Level 4.
Select the 24V test system.
24V
Select the voltage/duration
of 24V starting profile cor-
responding to Level 1.
1
Select the voltage/duration
of 24V starting profile cor-
responding to Level 2.
2
Select the voltage/duration
of 24V starting profile cor-
responding to Level 3.
3
Power Supply Function
75