Table of Contents
Advertisement
To mount the TV-VAVB3-E2
To mount the TV-VAVB3-E2
To mount the TV-VAVB3-E2
Turn the damper shaft to fully close the damper position. Ensure the damper is closed.
1
Mount the controller to the VAV terminal by sliding the clamp assembly onto the damper shaft.
2
Mount and secure an enclosure to cover the TV-VAVB3-E2.
3
NOTE For service access, we recommend that you allow at least 1 foot (.3 m) of clearance between the front
of the enclosure and adjacent surfaces.
TruVu™ VAVB3-E2
Installation and Start-up Guide
12
CARRIER CORPORATION ©2022
All rights reserved
Advertisement
Table of Contents
Troubleshooting
