To Mount The Tv-Vvtzc-E2 - Carrier TruVu VVTZC-E2 Installation And Startup Manual

To mount the TV-VVTZC-E2

To mount the TV-VVTZC-E2
Turn the damper shaft to fully close the damper position. Ensure the damper is closed.
1
Mount the controller to the VVT terminal by sliding the clamp assembly onto the damper shaft.
2
Mount and secure an enclosure to cover the TV-VVTZC-E2.
3
NOTE For service access, we recommend that you allow at least 1 foot (.3 m) of clearance between the front
of the enclosure and adjacent surfaces.
TruVu™ VVTZC-E2
Installation and Start-up Guide
11
To mount the TV-VVTZC-E2
©2022 Carrier.
All rights reserved.