Carrier TruVu VAVB3-E2 Installation And Startup Manual page 123

In the popup, select the Properties > Sensor tab to configure ZS sensors for Setpoint
Adjust.
Edit Increment – Amount of offset in degrees for each press of the up or down arrows
on the ZS Sensor for setpoint adjustment.
Allow Setpoint Adjustment – Check to allow setpoint adjustments on the specified ZS
sensor.
Sensor Setpoint Adjust Option – Check to select the ZS setpoint adjustment display.
TruVu™ VAVB3-E2
Installation and Start-up Guide
Appendix A: TV-VAVB3-E2 Points/Properties
117
D: 1
R: 0.1
0.5
1
D: (1) enabled
R: disabled/enabled
D: 3
CARRIER CORPORATION ©2022
All rights reserved