Carrier TruVu VAVB3-E2 Installation And Startup Manual page 35

Connect binary and analog output wiring to the screw terminals on the TV-VAVB3-E2 and to the controlled
4
device.
Connect the ground wire to the AO outputs' terminals.
5
Turn on the TV-VAVB3-E2's power.
6
See Troubleshooting inputs and outputs (page 102).
TruVu™ VAVB3-E2
Installation and Start-up Guide
29
Wiring inputs and outputs
CARRIER CORPORATION ©2022
All rights reserved