Wiring For Communications - Carrier TruVu VAVB3-E2 Installation And Startup Manual

Wiring for communications

Wiring for communications
The TV-VAVB3-E2 communicates on the following ports.
Port
Eth0
Eth1
Port S1 1
Comm/Service USB Port
Rnet Port
Act Net Port
1
Default for MS/TP is 76.8 kbps.
2
See To set up the controller through the Comm/Service ports (page 88).
TruVu™ VAVB3-E2
Installation and Start-up Guide
Protocol
BACnet/IP
BACnet/Ethernet
BACnet/MSTP
USB 2.0
2
See Wiring devices to the TV-VAVB3-E2's Rnet port (page 23).
See Wiring devices to the TV-VAVB3-E2's Act Net port (page 24).
22
Port type(s) Speed(s)
Ethernet 10 or 100 Mbps
RS485 9.6 to 115.2 kbps
USB
CARRIER CORPORATION ©2022
All rights reserved