To mount the TV-PSM
The TV-PSM can be mounted on a DIN rail or screwed to a surface.
NOTE We recommend screw mounting when installing in a high temperature and high humidity environment.
DIN rail mount
Push down and pull out the center tabs shown below to clear the DIN rail trough on the back of the controller.
1
Place the controller on the DIN rail so that the rail is in the trough on the back of the controller.
2
Push the center tabs towards the controller until you hear them click.
3
Pull gently on the controller to verify that it is locked in place.
4
TruVu™ ChillerVu™ Plant Controller
Installation and Start-up Guide
7
To mount the TV-PSM
©2022 Carrier.
All rights reserved.