Wiring inputs and outputs
Verify that the TV-VAVB3-E2's power and communications connections work properly.
1
Turn off the TV-VAVB3-E2's power.
2
Connect the input wiring to the screw terminals on the TV-VAVB3-E2.
3
NOTE Connect the shield wire to the – terminal with the ground wire. Do not connect the shield wire at the
other end of the cable as this will cause a ground loop error.
TruVu™ VAVB3-E2
Installation and Start-up Guide
28
CARRIER CORPORATION ©2022
All rights reserved