To Mount The Tv-Ucxp683T - Carrier TruVu UCXP683T Installation And Startup Manual

To mount the TV-UCXP683T

The TV-UCXP683T can be mounted on a DIN rail or screwed to a surface.
DIN rail mount
In the trough on the back of the controller, hook the edge of the DIN rail under the controller's two mounting
1
flanges.
Push the controller toward the DIN rail until you hear it click and the spring-loaded latch secures the
2
controller to the DIN rail.
Screw Mount
Leave about 2 in. (5 cm) on each side of the controller for wiring.
Pull the mounting tabs until they click in place. Insert #6 screws through them. Use no more than 12 in lbs. torque
to secure plastic tab to mounting surface. Use flat washers to prevent the screw head from deforming the plastic.
TruVu™ UCXP683T
Installation and Start-up Guide
A: 7.78 in. (19.77 cm)
B: 5.88 in. (14.94 cm)
C: 5.3 in. (13.45 cm)
D: 4.50 in. (11.43 cm)
Depth: 2.00 in (5.08 cm)
7
To mount the TV-UCXP683T
CARRIER CORPORATION ©2022
All rights reserved