Wiring Devices To The Tv-Vavb3-E2'S Rnet Port - Carrier TruVu VAVB3-E2 Installation And Startup Manual

Wiring devices to the TV-VAVB3-E2's Rnet port

You can wire the following devices to the TV-VAVB3-E2's Rnet port in a daisy-chain configuration:
•
ZS sensors
•
Wireless Adapter that communicates with wireless sensors
•
Equipment Touch
•
TruVu™ ET Display
See the device's Installation and Start-up Guide for complete wiring instructions.
NOTES
•
ZS sensors, a Wireless Adapter, and an Equipment Touch can share the same Rnet.
•
The Rnet communicates at a rate of 115.2 kbps.
TruVu™ VAVB3-E2
Installation and Start-up Guide
Wiring devices to the TV-VAVB3-E2's Rnet port
23
CARRIER CORPORATION ©2022
All rights reserved