Troubleshooting
Troubleshooting inputs and outputs
The i-Vu® interface shows if you have I/O errors resulting from a misconfigured microblock.
To check for errors:
In the i-Vu® navigation tree, select the equipment controlled by the TV-VAVB3-E2.
1
On the Properties page, select the I/O Points tab.
2
Click the Name of any input or output whose name is red (indicates an error) to open its dialog box.
3
On the Details tab, scroll down to see the Reliability field under BACnet Configuration.
4
Anything other than No Fault Detected indicates an error. See the table below to determine the error and
5
possible actions to take.
TruVu™ VAVB3-E2
Installation and Start-up Guide
102
CARRIER CORPORATION ©2022
All rights reserved