Table of Contents
Advertisement
5782ENC-H264HD-IPASI
Professional Contribution H.264 and MPEG-2 Encoder
4.8.
PRESET
For each of the 10 Presets the following parameters are available:
Preset Name: This field allows the user to enter a name for each preset.
Preset Store: This control will take the current 5782ENC-H264HD-IPASI settings and save them to a
Preset. When storing a preset all parameters will be stored except the following:
•
Control Port IP address, Netmask and Gateway.
•
Data Port 1 and 2 IP address, Netmask and Gateway.
•
Syslog Configuration.
•
Other preset configurations.
•
SNMP Trap destinations, Faults and Video Notify status.
Preset Recall: This control will take the stored 5782ENC-H264HD-IPASI settings and apply them.
When recalling a preset all parameters will be set except the following:
•
Control Port IP address, Netmask and Gateway will not change.
•
Data Port 1 and 2 IP address, Netmask and Gateway will not change.
•
Syslog Configuration will not change.
•
Presets will not change.
•
SNMP Trap destinations, Faults and Video Notify status will not change.
Page - 22
Figure 4-13: WebEASY
Revision 1.0
– Preset
®
Advertisement
Table of Contents
