System Tab; Figure 4-3: Webeasy; System Tab - Part 1 - evertz 5782ENC-H264HD-IPASI User Manual

5782ENC-H264HD-IPASI
Professional Contribution H.264 and MPEG-2 Encoder
4.1.

SYSTEM TAB


Note: For IP address settings on Control and Data ports, after applying any changes,
the device must be rebooted for the changes to take. Reboot can be pressed at the
bottom of this System tab after all changes are made.
Firmware Version
Firmware Version: This monitor displays the current firmware version.
Control Port (for future implementation)
Data Port Control (must reboot in order for settings new to take effect)
For Port 1 and Port 2
IP Address: This control allows the user to set the IP address on the Data Port. This control will
also display the currently set IP address.
Page - 8

Figure 4-3: WebEASY

Revision 1.0

– System Tab - Part 1

®