evertz 5782ENC-H264HD-IPASI User Manual page 35

SCTE 35 and SCTE 104
There are no SCTE 35 GPI triggers on the 5782ENC and this section does not imply. The companion
7882ENC-H264HD-IPASI has the SCTE 35 GPI feature.
Fault Configuration: This control allows the user to turn reporting of a particular fault on and off by
placing a check in the box next to the desired fault.
Fault Status: This control allows the user to read the present state of a particular fault. If the box is
green there is no fault detected, when the box turns red this indicated the presence of a fault.
System Send Trap and System Fault Present
Fault Configuration and Fault Status
Fan 1 Status: This control enables the Fan 1 status to be checked for faults. This fan is for the FPGA
cooling. If a fault occurs on this fan contact Evertz Service for recommended action.
Metadata Bitrate Status: This control enables the metadata Bitrate to be checked for faults.
LTC Bitrate Status: This control enables the LTC Bitrate to be checked for faults.
Control Data Bitrate Status: This control enables the Control Data Bitrate to be checked for faults.
Encoder Input Status: This control enables the Encoder Input Status to be checked for faults.
Temperature Status: This control enables the Temperature Status to be checked for faults.
Professional Contribution H.264 and MPEG-2 Encoder
Revision 1.0
5782ENC-H264HD-IPASI
Page - 25