evertz 5782ENC-H264HD-IPASI User Manual page 19

Netmask: This control allows the user to set the Netmask for the Data Port IP address. This control
will also display the currently set Netmask.
Gateway: This control allows the user to set the Gateway for the Data Port. This control will also
display the currently set Gateway address.
Syslog Configuration:
Syslog is a valuable tool for debugging the device operation. It is essentially serial readouts over IP,
sent to a dedicated server. If issues are present, Evertz can help install and setup a syslog server for
constant monitoring of the device activity.
External Syslog: This parameter allows the user to enable or disable sending syslog information to
the configured external server.
Syslog Server IP: This parameter allows the user to assign the external syslog server IP address.
This will be the address of a PC with the syslog server software installed (ex Kiwi Syslog Server).
Data Port Monitor
For Data Port 1 and Data Port 2
SFP Part Number: This parameter returns the part number of the SFP located in the Data Port.
Link Status: This parameter returns the link status for the Data Port. The status could be either Up or
Down.
Link Info: When the link is Up, this parameter returns link speed & duplex mode information for Data
Port.
Receive Bandwidth: When the link is Up, this parameter returns the receive bandwidth currently
being read on the Data Port. Reading is in kbps.
Transmit Bandwidth: When the link is Up, this parameter returns the transmit bandwidth currently
being sent on the Data Port. Reading is kbps.
Professional Contribution H.264 and MPEG-2 Encoder
Revision 1.0
5782ENC-H264HD-IPASI
Page - 9