System Tab; System Tab; Figure 5-1: Vistalink - System Tab - evertz 5782ENC-H264HD-IPASI User Manual

5782ENC-H264HD-IPASI
Professional Contribution H.264 and MPEG-2 Encoder
5.1.

SYSTEM TAB


Note: For IP address settings on Control and Data ports. After applying any
changes, the device must be rebooted for the changes to take. Reset can be pressed
at the bottom of this System tab after all changes are made.
Firmware Version: This parameter returns the firmware version on the card.
Control Port – For future implementation.
Data Port Control
For Data Port Control 1 and Data Port Control 2
IP Address: Allows user to set the IP Address for the Data Port.
NetMask: Allows user to set the Subnet NetMask for the Data Port.
Gateway: Allows user to set the Gateway for the Data Port.
Page - 28
Figure 5-1: VistaLINK
Revision 1.0

- System Tab

®