Product Features; Figure 4-6: Webeasy - Product Features - evertz 5782ENC-H264HD-IPASI User Manual

TRAP Temperature Threshold: This control allows the user to set a temperature threshold to trigger
a fault or trap.
System Control
Default Set: This parameter can be used to reset most of the device's parameters to factory default
values. All parameters except the below will be reset to Factory defaults:
•
Control Port IP address, Netmask and Gateway will be preserved.
•
Syslog Configuration will be preserved.
•
Presets will be preserved.
•
SNMP Trap destinations, Faults and Video Notify status will be preserved.
Reboot: This control can be used to soft reboot the device. It will cycle the power relay and cause an
effective power cycle.
4.2.

PRODUCT FEATURES

The 5782ENC-H264HD-IPASI has the ability to enable features by adding/updating applicable licenses.
Please contact Evertz Microsystems Ltd for any additional License generation along with Product Serial
Number and Product MAC address.
System
Product License: This parameter allows the user to apply new License key provided by Evertz
Microsystems Ltd. A license key will be a long string generated by Evertz, specific to the card being
upgraded. When this string is obtained the current Product License can be erased and the new key
can be copy/pasted into the section. When applied the new license will take and the new functionality
will change to enabled under the Prod Feature section.
Product Serial Number: This parameter displays the card serial number. This is required by Evertz
when generating or updating license files on the 5782ENC-H264HD-IPASI.
Product MAC Address: This parameter displays the card MAC address. This is required by Evertz
when generating or updating license files on the 5782ENC-H264HD-IPASI.
Professional Contribution H.264 and MPEG-2 Encoder
Figure 4-6: WebEASY – Product Features
Revision 1.0
5782ENC-H264HD-IPASI
Page - 11