Figure 5-10: Vistalink; Snmp Trap Destinations Tab - evertz 5782ENC-H264HD-IPASI User Manual

5782ENC-H264HD-IPASI
Professional Contribution H.264 and MPEG-2 Encoder

Figure 5-10: VistaLINK

- SNMP Trap Destinations Tab

®
For each of the 10 SNMP Trap Destinations the following parameters are available:
Destination Enable: This parameter allows the user enable this Destination to be able to send a
Trap to. This parameter is reserved for future use. For current trap destinations please configure the
Destination IP address on the 570FC.
Destination IP Address: This parameter allows the user to enter the IP address to associate with
this destination. This parameter is reserved for future use. For current trap destinations please
configure the Destination IP address on the 570FC.
Page - 41
Revision 1.0