Table of Contents
Advertisement
5782ENC-H264HD-IPASI
Professional Contribution H.264 and MPEG-2 Encoder
Temperature Monitor 1: This displays the temperature of the module.
Trap Temperature Threshold: This control allows the user to set a temperature threshold to trigger
a fault or trap.
System Control
Default Set: This parameter can be used to reset most 5782ENC-H264HD-IPASI parameters to
factory default values. All parameters except the below will be reset to Factory defaults:
•
Control Port IP address, Netmask and Gateway will be preserved.
•
Syslog Configuration will be preserved.
•
Presets will be preserved.
•
SNMP Trap destinations, Faults and Video Notify status will be preserved.
Reset: This control can be used to soft reboot the 5782ENC-H264HD-IPASI. It will cycle the power
relay and cause an effective power cycle.
Page - 30
Revision 1.0
Advertisement
Table of Contents
