Preset Tab; Preset Tab; Figure 4-13 : Webeasy - evertz 7882J2KX-IPASI User Manual

7882J2KX-IPASI
Single Channel J2K Encoder/Decoder
4.9.

PRESET TAB

For each of the 10 Presets the following parameters are available:
Preset Name: This field allows the user to enter a name for each preset.
Preset Store: This control will take the current 7882J2KX-IPASI settings and save them to a Preset.
When storing a preset, all parameters will be stored except the following:
•
Control Port IP address, Netmask and Gateway
•
Data Port 1 and 2 IP address, Netmask and Gateway
•
Syslog Configuration
•
Presets
•
SNMP Trap destinations, Faults and Video Notify status
Preset Recall: This control will take the stored 7882J2KX-IPASI settings and apply them. When
recalling a preset all parameters will be set except the following:
•
Control Port IP address, Netmask and Gateway will not change
•
Data Port 1 and 2 IP address, Netmask and Gateway will not change
•
Syslog Configuration will not change
•
Presets will not change
•
SNMP Trap destinations, Faults and Video Notify status will not change
Page - 26

Figure 4-13 : WebEASY

Revision 1.0

– Preset Tab

®