Table of Contents
Advertisement
3.
GETTING STARTED
The 5782ENC-H264HD-IPASI module comes with a companion rear plate that occupies one slot in the
frame. The module can be installed in a 570FR chassis.
IN 1, 2:
BNC connectors used to input HD/SD SDI with embedded audio.
OUTPUT 1:
Selectable as Contribution encoder ASI output or HD/SD SDI input bypass.
OUTPUT 2:
Selectable as Contribution encoder ASI output or HD/SD SDI input bypass.
DATA 1,2:
There are two SFP cages for streaming output. RJ-45 SFPs can be provided for
Ethernet connection. Contribution and IPTV encoder can be output from both ports.
3.1.
CONNECTING TO AN ETHERNET NETWORK
The 5782ENC-H264HD-IPASI is made possible using the 570FC frame controller. Please refer to the
570FR manual for making your network connections.
3.2.
CARE AND HANDLING OF OPTICAL FIBER WHEN USING SFP MODULES
3.2.1. Handling and Connecting Fibers
Never touch the end face of an optical fiber. Always keep dust caps on optical
fiber connectors when not connected and always remember to properly clean the
optical end face of a connector before making a connection.
The transmission characteristics of the fiber are dependent on the shape of the optical core and
therefore care must be taken to prevent fiber damage due to heavy objects or abrupt fiber bending.
Evertz recommends that the user maintains a minimum bending radius of 5 cm to avoid fiber-bending
loss that will decrease the maximum attainable distance of the fiber cable. The Evertz fiber optic
modules come with cable lockout devices, to prevent the user from damaging the fiber by installing a
module into a slot in the frame that does not have a suitable I/O module.
Professional Contribution H.264 and MPEG-2 Encoder
Figure 3-1: 5782ENC-H264-HD Rear Plate
Revision 1.0
5782ENC-H264HD-IPASI
Page - 5
Advertisement
Table of Contents
