Parameterization Via Gsd - WAGO 750-563 Manual

44 • 750-563 [2 AO 0/4-20mA / 6-18V DC 16 Bit]
Parameter Setting
2.1.1.9.5.1.5 Status Indication
Status messages are output on the status indicator in the lower area of the
parameterizing dialog.
Fig. 2.1.1-13 Status indication

2.1.1.9.6 Parameterization via GSD

With use of a Profibus fieldbus system, the module can be parameterized via
the presetting in the GSD.
Note
The values for the lower and upper limit value must be entered in raw data
format, that is, if a user scaling is set, it must be taken into account for the
entry of the limit values.
If in addition a numeric display in the (+/-) range is selected, the limit values
must be converted into equivalent values for a positive numeric range.
WAGO-I/O-SYSTEM 750
I/O Modules