2.1.1.9.3.1.5
Status Indication
Status messages are output on the status indicator in the lower area of the
parameterizing dialog.
Fig. 2.1.1-13 Status indication
2.1.1.9.4 Parameterization via GSD
With use of a Profibus fieldbus system, the module can be parameterized via
the presetting in the GSD.
Dazu erfolgt der Zugriff auf den Parameter 0 und 1 (entspricht Register 32
Kanal 1 und Register 32 Kanal 2) über den Parameterkanal. (übersetzen!!!)
Note
The values for the lower and upper limit value must be entered in raw data
format, that is, if a user scaling is set, it must be taken into account for the
entry of the limit values.
If in addition a numeric display in the (+/-) range is selected, the limit values
must be converted into equivalent values for a positive numeric range.
WAGO-I/O-SYSTEM 750
I/O Modules
750-562 [2 AO 0/+-10V DC 16 Bit]
Parameter Setting
• 31