Figure E-5 Removing The Front Bezel - Sun Microsystems Enterprise 6500 Reference Manual

Caution – To prevent breakage, do not grasp the bezel by the bottom edge.
FIGURE E-5
4. Remove the bezel and set it aside.
5. Open the hinged door on the front panel by pulling the right side of the upper
door panel.
The door is hinged on the left side and swings open if pulled firmly.
6. Remove the side panel closest to the key switch assembly.
See Chapter 12 "Preparing for Service," for information on removing the side panel.
7. Disconnect the media tray power assembly and/or data cable assembly from the
back of the media tray.
8. Pull the cable assembly through the opening in the cabinet to the front of the card
cage.
The cable assembly runs through the front of the fan tray shelf and the system
cabinet pillar to the SCSI adapter assembly.
9. Disconnect the cable assembly from the front of the SCSI adapter assembly and
remove the cable assembly (
E-8 Sun Enterprise 6500/5500/4500 Systems Reference Manual • April 1998
Removing the Front Bezel
FIGURE E-6
).