Safety Precautions And Tools Requirements; Safety Precautions - Sun Microsystems Enterprise 6500 Reference Manual

2
C H A P T E R
Safety Precautions and Tools
Requirements
2.1

Safety Precautions

For your protection, observe the following safety precautions when setting up your
equipment:
Follow all cautions, warnings, and instructions marked on the equipment.
Never push objects of any kind through openings in the equipment as they may
touch dangerous voltage points or short out components that could result in fire
or electric shock.
Refer servicing of equipment to qualified personnel.
To protect both yourself and the equipment, observe the following precautions:
TABLE 2-1
Item Problem
Wrist or foot ESD
strap
ESD mat ESD
Cover panels System damage
and overheating
Card cage slot System damage
filler panels and and overheating
load boards
Safety Precautions
Precaution
Wear a conductive wrist strap or foot strap when handling printed
circuit boards.
An approved ESD mat provides protection from static damage when
used with a wrist strap or foot strap. The mat also cushions and
protects small parts that are attached to printed circuit boards.
Re-install all cabinet cover panels after performing any service work on
the system.
Make sure all empty board slots have a filler panel installed.
NOTE: You must use load boards instead of filler panels in the 16-slot
Enterprise 6500 system card cage.
2-1