Removing And Replacing A Disk Drive; Figure 5-2 Removing The Front Panel; Figure 5-3 Disk Drive Numbering - Sun Microsystems StorEdge T3 Service Manual
Array
Hide thumbs
Also See for StorEdge T3:
- Installation, operation and service manual (148 pages) ,
- User manual (124 pages) ,
- Configuration manual (88 pages)
Table of Contents
Advertisement
5.3.1
Removing and Replacing a Disk Drive
1. Observe static electricity precautions.
See Section 1.5, "Static Electricity Precautions" on page 1-5
2. Remove the front panel by pressing in on the side latches and pulling the cover
forward. See
Latch
FIGURE 5-2
3. Locate the disk drive that needs to be replaced.
Disk drives are numbered from 1 to 9 starting on the left side of the array.
Disk 1
FIGURE 5-3
5-8
Sun StorEdge T3 and T3+ Array Field Service Manual • September 2001
.
FIGURE 5-2
Removing the Front Panel
Disk Drive Numbering
Latch
Disk 9
Advertisement
Table of Contents
Troubleshooting
