Figure E-4 Replacing The Fan In The Media Tray In The Enterprise 6500/5500 Systems - Sun Microsystems Enterprise 6500 Reference Manual

Note – It is not necessary to remove the media tray from the cabinet.
Cover
FIGURE E-4
3. Pull the power cable off the fan.
4. Remove the four screws from the fan and replace the fan.
5. Reverse steps 1 through 3 to complete the procedure.
E.2.4.2 Removing the Cable Assemblies
1. Completely power off the Enterprise system.
See the power off instructions in Chapter 11 "Powering Off and On."
2. Remove the key from the key switch.
3. Grasp the front bezel on both sides at the top and pull it out far enough to
disengage the ball studs (
Fan location
Replacing the Fan in the Media Tray in the Enterprise 6500/5500 Systems
FIGURE E-5
).
Appendix E Non-Chassis Field Replaceable Units (FRUs) E-7