Handling Precautions; Figure 3-8 Ultrasparc Ii Module Connectors - Sun Microsystems Enterprise 6500 Reference Manual

Screws (2)
288-pin connector
FIGURE 3-8
3.4.4

Handling Precautions

The following precautions should be exercised when handling UltraSPARC II
modules:
UltraSPARC II modules are static-sensitive and a grounding wrist strap field kit
must be used when handling the modules.
Always handle the modules by the edges and not by the smaller black heat sinks
that break easily if handled improperly.
Do not handle the modules by touching the gold pins on the compression
connectors. Natural oils on the hands cause these connectors to oxidize and
corrode over a period of time, resulting in the need for module cleaning or
replacement.
3-12 Sun Enterprise 6500/5500/4500 Systems Reference Manual • April 1998
UltraSPARC II Module Connectors
Screws (3)
144-pin connector