Figure 4-26 Pci And Riser Card Removal - Sun Microsystems Enterprise 6500 Reference Manual

FIGURE 4-26
3. Loosen and then remove the thumbscrew on the component side of the I/O+
board next to the external PCI card connector (
4. Refer to
a. Grasp the card to be removed with your index fingers on either side of the card
where it mates with the connector on the riser card (thumbs against the
connector).
b. Loosen the card from the PCI bus connector and the catch mechanism by firmly
pushing with your thumbs against the PCI bus connector, while grasping the
card edge with the index fingers of both hands.
5. Once the card is free of the PCI bus connector and the metal catch mechanism,
remove the card from the I/O+ board (
4-30 Sun Enterprise 6500/5500/4500 Systems Reference Manual • April 1998
Riser card
detail
PCI and Riser Card Removal
while removing the card as follows:
FIGURE 4-27
Standoff
).
FIGURE 4-26
).
FIGURE 4-27
Thumbscrew
detail