FIGURE 11-2
11.1.2
Enterprise 4500 System
1. Notify users that the system is going down.
2. Back up the system files and data to tape, if necessary.
3. Halt the system using the appropriate commands.
Refer to the Solaris Handbook for SMCC Peripherals that corresponds to your operating
system.
4. Wait for the system-halted message and the boot monitor prompt.
5. Turn the key switch on the front panel of the server to the Standby position (fully
counterclockwise) (
Rear view
AC Power Switch (Enterprise 6500 and 5500)
).
FIGURE 11-3
Local/remote switch
Main power switch
Chapter 11
Powering Off and On
11-3